Equipment

ERA-MAX

This all-purpose electrical exploration apparatus allows for solving a wide range of tasks related to engineering surveys, ore mineral and non-metallic mineral deposits exploration, ecological and archaeological surveys, building foundations and municipal facilities underground networks examination. It can work both in resistivity sounding and self-potential exploration modes. It also provides for operation without electrodes galvanic ground connection. The equipment was developed by «NPP ERA», Russia, St-Petersburg.

OhmMapper

OhmMapper system is used for cross section unit resistance measurement in the areas with high surface resistance where the use of usual equipment with galvanic couple (on the base of direct current) is inefficient. The system provides operator with up to five packetized profiles simultaneously as well as the field map with explored and unexplored areas. Data is stored in nonvolatile memory for further view and transfer to the central workstation. The system producer is Geometrics, USA.

SGT-ETT

SGD-ETT station is meant for electrical exploration surveys for geological engineering, ore and oil-and-gas geophysics using the following techniques: electrical resistivity tomography by the methods of resistivity and induced polarization, vertical electrical sounding, potential method. Owing to the use of up-to-date elementary potential digital computing components, the station provides for prompt and accurate electrical exploration for solving a wide range of geological tasks. System producer is NPK «SibGeofizPribor», Russia, Novosibirsk.

ERP-1

Electrical exploration device ERP-1 detects soils resistivity qualities and solves a wide range of geological engineering tasks. It provides for geophysical investigations by the resistance technique in DC mode and high-frequency current mode, as well as self-potential method. It also can be used for stray current measurement by induced polarization method in INFAZ-VP version. Producer is MChP «Linia», Russia, Sevastopol.

Cycle-6

The equipment is used for geophysical surveys by near-field transient electromagnetic sounding technique. Producer is NTF «Elta-Geo», Russia, Novosibirsk.

Cycle-7

This equipment is used for geophysical surveys by near-field transient electromagnetic sounding technique. Unlike Cycle-6, measuring unit Cycle-7 can commute with operating workstation via Bluetooth wireless protocol that increases work convenience. Producer is NTF «Elta-Geo-2», Russia, Novosibirsk.

Ground penetrating radar «Oko-2»

GPR is up-to-date geophysical device that is used for detection of different objects, including non-metal ones in different environments. Mobility, compact size and ability to carry out highly detailed nondestructive monitoring of environment make it unique among all geophysical equipment. GRP is used for solving geological engineering, hydrogeology and exploration tasks such as: surveys of motor roads, railroad embankments, flight strips; search for buried localized and extended objects; inspection of engineering structures, building structures including reinforced-concrete ones; mapping of tectonic structures; detection of ice cover thickness; surveying of basins and mapping of near bottom sediments; detection of seasonal freezing and thawing of soil layer thickness, mapping of permafrost areas and taliks; archeological surveys. Producer is Logis LLC, Russia, Ramenskoe.

2×24 channel station «Lakkolit X-M2»

The station is meant for seismic surveys performance by refracted waves and reflected waves methods. The station consists of two «Lakkolit» blocks. The blocks are operated by laptop or special control unit. Every block provides for data receiving from 24 channels and its preliminary processing. Producer is Logis LLC, Russia, Ramenskoe.

48 channel station «SGD-SEL»

SGD-SEL engineering seismic station is used for preliminary signal amplification, AD conversion, registered information recording in nonvolatile storage device and its displaying on inbuilt screen. The station is purposed for seismic surveys implementation by refracted waves and reflected waves methods with the use of electromagnetic pulser «Geoton-6» or pulse generator of «sledgehammer», «falling weight» type. Producer is NPK «SibGeofizPribor», Russia, Novosibirsk.

Telemetering station «SGD-SET»

Seismic station «SGD-SET» is designed for seismology exploration by refracted waves, reflected waves, common-midpoint methods, for surveys within technogenic objects seismic monitoring systems with the use of electromagnetic pulser «Geoton-6» or pulse generator of «sledgehammer», «falling weight» type. The station was developed and produces by NPK «SibGeofizPribor», Russia, Novosibirsk.

Mechanical-hydraulic drilling unit (UBGM-1)

Unit «UBGM-1» on the base of multipurpose all-terrain vehicle is used for solving different geological engineering tasks by drilling boreholes in soils of 1-4 degrees of drillability, including blowing off and mud flushing, subsoil sampling and soil testing by static probing. Producer is Kurganavtoremont OJSC, Russia, Kurgan.

Compact auger-drill machine (UBShM-1-13)

Unit «UBShM-1-13» is designed for geophysical and geological boreholes drilling by rotary method with or without mud flushing. The unit is assembled on sledge that can be transported by all-terrain vehicle. Producer is Kurganavtoremont OJSC, Russia, Kurgan.

Compact auger-drill machine (UBShM-1-20)

Unit «UBShM-1-20» is used for drilling of vertical boreholes by screw or coring method with and without mud flushing in soils of 1-4 degrees of drillability and by coring method with mud flushing in soils of up to 8 degree of drillability. The unit is assembled on automotive chassis. Producer is Kurganavtoremont OJSC, Russia, Kurgan.

Tacheometer Trimble M3 DR (5″) W

Tacheometer Trimble M3 DR (5″) W combines firm frame, apparatus functionality, versatility, reliability of embedded software. Advanced range finder provides for quality measurement without reflector at the distance of up to 300 meters. Nikon lenses guarantee targeting with pinpoint accuracy. Producer is Trimble Navigation, USA.

Digital surveyor’s level Trimble DINI 0.7

Digital surveyor’s level Trimble DINI 0.7 allows for detecting distance and elevation on a target object. DINI 0.7 is one of the most high-precision digital levels existing nowadays, mean square deviation per 1 km of double pass with the use of invar leveling rod is about 0.7 mm. Leveling instrument is compact and shockproof. Producer is Trimble Navigation, USA.

RD7000DL locator

RD7000DL locator is designed to detect active and passive frequencies as well as three different sonde signals. This locator is used for standard cable and pipe location and for locating deep, underground dirty water pipes and drains and where the pipe material does not allow for the use of standard locating technology but where sondes can be deployed. The different sonde frequencies allow the RD7000DL to locate pipes made from a wide variety of materials including: cast iron, plastic, clay, fiber, concrete and brick. Producer is Radiodetection, USA.

Trimble 5700 L1

Trimble 5700 L1 is modular fixed-frequency 12-channel GPS system designed for topographic mapping, geodetic networks densifying and developing. Fixed-frequency receiver 5700 L1 is assembled on the base of two-frequency GPS-receiver 5700, fixed-frequency wireless Trimble A3 is used as an aerial. Producer is Trimble Navigation, USA.

IPI2Win

The program is developed for automatic and semiautomatic (interactive) data interpretation of different vertical electrical sounding techniques. The program is designed at Geophysics subdepartment of Moscow state university.

RadExPro Plus 3.90

he program processes data of ground, river and sea seismic exploration and controls the data quality. The program is designed by DEKO-geofizika LLC;, Russia, Moscow.

Godograf

This program is used for plotting of 2D velocity profiles, accounting for the relief, physical parameters profiles and horizontal velocity maps if there are several profiles. The program is designed at Geological department of Moscow state university.

KARP

This program is the product of our company, is purposed for near-field transient electromagnetic sounding data processing. It allows for carrying out of preliminary data processing, converting initial signal into geoelectric parameters and plotting complete interpretation profile.

Res2DInv

Res2Dinv is a computer program that will automatically determine a two-dimensional (2-D) environmental resistivity model for the data obtained from electrical imaging surveys. It can deal with the Wenner (alpha, beta, gamma), Wenner-Schlumberger, pole-pole, pole-dipole, inline dipole-dipole, equatorial dipole-dipole, gradient and non-conventional arrays. Supports up to 16000 electrodes and 21000 data points on computers with 1GB RAM. The program is designed by Geotomo Software, Malaysia.

ZondRes2d

This program is used for 2D electrical resistivity tomography data processing by the resistivity and induced polarization techniques for land, water and borehole surveys. ZondRes2d deals with a wide range of tasks from mathematical modeling and sensitivity analysis to field data processing. The program is designed by Zond Software, St. Petersburg, Russia.